Consequences of Mixotrophy on Cell Energetic Metabolism in Microchloropsis gaditana Revealed by Genetic Engineering and Metabolic Approaches.

Algae belonging to the Microchloropsis genus are promising organisms for biotech purposes, being able to accumulate large amounts of lipid reserves. These organisms adapt to different trophic conditions, thriving in strict photoautotrophic conditions, as well as in the concomitant presence of light plus reduced external carbon as energy sources (mixotrophy). In this work, we investigated the mixotrophic responses of Microchloropsis gaditana (formerly Nannochloropsis gaditana). Using the Biolog growth test, in which cells are loaded into multiwell plates coated with different organic compounds, we could not find a suitable substrate for Microchloropsis mixotrophy. By contrast, addition of the Lysogeny broth (LB) to the inorganic growth medium had a benefit on growth, enhancing respiratory activity at the expense of photosynthetic performances. To further dissect the role of respiration in Microchloropsis mixotrophy, we focused on the mitochondrial alternative oxidase (AOX), a protein involved in energy management in other algae prospering in mixotrophy. Knocking-out the AOX1 gene by transcription activator-like effector nuclease (TALE-N) led to the loss of capacity to implement growth upon addition of LB supporting the hypothesis that the effect of this medium was related to a provision of reduced carbon. We conclude that mixotrophic growth in Microchloropsis is dominated by respiratory rather than by photosynthetic energetic metabolism and discuss the possible reasons for this behavior in relationship with fatty acid breakdown via ß-oxidation in this oleaginous alga.

Antibacterial Cellulose Nanopapers via Aminosilane Grafting in Supercritical Carbon Dioxide.

In this work, we present an innovative strategy for the grafting of an antibacterial agent onto nanocellulose materials in supercritical carbon dioxide (scCO2). Dense cellulose nanofibril (CNF) nanopapers were prepared and subsequently functionalized in supercritical carbon dioxide with an aminosilane, N-(6-aminohexyl)aminopropyltrimethoxysilane (AHA-P-TMS). Surface characterization (X-ray photoelectron spectroscopy, contact angle, ζ-potential analysis) evidenced the presence of the aminosilane. The results show that the silane conformation depends on the curing process: a nonpolycondensed conformation of grafted silane with the amino groups facing outwards was favored by curing in an oven, while the curing step performed in scCO2 yielded CNF structures with the alkyl chain facing outwards. The grafted nanopapers exhibited antibacterial activity, and no antibacterial agent was released into the media. Furthermore, these materials proved to benefit from low cytotoxicity. This study offers a proof of concept for the covalent grafting of active species on nanocellulose structures and the control of aminosilane orientation using a green and controlled approach. These newly designed materials could be used for their antibacterial activity in the biomedical field. Thus, perspectives for topical administration and design of wound dressing could be envisaged.

Antimicrobial Cellulose Nanofibril Porous Materials Obtained by Supercritical Impregnation of Thymol.

This study presents the impregnation in supercritical carbon dioxide (scCO2) of nanocellulose-based structures with thymol as a natural antimicrobial molecule to prepare bioactive, biosourced materials. First, cellulose nanofibrils (CNFs) were used to produce four types of materials (nanopapers, cryogels from water or tert-butyl alcohol suspensions, and aerogels) of increasing specific surface area up to 160 m2·g-1, thanks to the use of different processes, namely, vacuum filtration, freeze-drying, and supercritical drying. Second, these CNF-based structures were impregnated with thymol in the scCO2 medium using a relatively low temperature and pressure of 40 °C and 100 bar during 1 h. The amount of impregnated thymol in the different CNF materials was investigated by fluorescence spectroscopy, 13C NMR analysis, and gas chromatography. All three methods consistently showed that the amount of impregnated thymol increases with the specific surface area of the material. The antimicrobial activity of the impregnated CNF-based materials was then measured against three reference strains of microorganisms: the Gram-negative Escherichia coli and Gram-positive Staphylococcus epidermidis bacteria, and the yeast Candida albicans using the disk diffusion test method. The latter revealed the leaching of thymol in sufficient amounts to generate antimicrobial activity against the three strains in the case of the cryogel derived from a tert-butyl alcohol suspension and the aerogel, which are the two materials exhibiting the highest specific surface areas. The proposed strategy, therefore, enabled us to precisely steer the amount of active molecule loading and the related antimicrobial activity by adjusting the specific surface area of the biosourced material impregnated in green supercritical conditions. These results are very promising and confirm that supercritical impregnation of active molecules onto nanocellulose three-dimensional (3D) structures can be an interesting solution for the design of active medical devices such as wound dressings.

Superior efficacy of HI-6 dimethanesulfonate over pralidoxime methylsulfate against Russian VX poisoning in cynomolgus monkeys (Macaca fascicularis).

Organophosphorus nerve agents still represent a serious risk to human health. In the French armed forces, the current emergency treatment against OP intoxications is a fully licensed wet-dry dual-chambered autoinjector (Ineurope ®), that contains pralidoxime methylsulfate (2-PAM) to reactivate inhibited acetylcholinesterase (AChE), atropine sulfate (AS) and avizafone chlorhydrate (AVZ). While this treatment is effective against several of the known nerve agents, it shows little efficacy against the Russian VX (VR), one of the most toxic compounds. HI-6 dimethanesulfonate (HI-6 DMS) is an oxime able to reactivate in vitro and in vivo VR-inhibited AChE. To confirm the superiority of HI-6 DMS towards 2-PAM prior to licensing, we compared the two 3-drug-combinations (HI-6 vs 2-PAM, 33 and 18 mg/kg respectively, equimolar doses; AS/AVZ 0.25/0.175 mg/kg respectively) in VR-poisoned cynomolgus macaques, the model required by the French drug regulatory agency. In parallel we performed HI-6 pharmacokinetics analysis using a one compartment model. A better efficacy of the HI-6 DMS combination was clearly observed: up to 5 LD50 of VR (i.m.), a single administration of the HI-6 DMS combination, shortly after the onset of clinical signs, prevented death of the four intoxicated animals. Conversely 2-PAM only prevented death in one out of three subjects exposed to the same amount of VR. As expected with V agents, reinhibition of blood AChE was observed but without any apparent impact on the clinical recovery of the animals. A single administration of the HI-6 DMS combination was still but partially effective at 15 LD50 of VR, allowing a 50% survival rate.

Lens-free Video Microscopy for the Dynamic and Quantitative Analysis of Adherent Cell Culture.

Here, we demonstrate that lens-free video microscopy enables us to simultaneously capture the kinetics of thousands of cells directly inside the incubator and that it is possible to monitor and quantify single cells along several cell cycles. We describe the full protocol used to monitor and quantify a HeLa cell culture for 2.7 days. First, cell culture acquisition is performed with a lens-free video microscope, and then the data is analyzed following a four-step process: multi-wavelength holographic reconstruction, cell-tracking, cell segmentation and cell division detection algorithms. As a result, we show that it is possible to gather a dataset featuring more than 10,000 cell cycle tracks and more than 2 x 106 cell morphological measurements.

Tailoring nanostructured lipid carriers for the delivery of protein antigens: Physicochemical properties versus immunogenicity studies.

New vaccine formulations are still highly anticipated in the near-future to face incoming health challenges, such as emergence or reemergence of severe infectious diseases, immunosenescence associated with elderly or the spread of pathogens resistant to antibiotics. In particular, new nanoparticle-based adjuvants are promising for sub-unit vaccines in order to elicit potent and long lasting immune responses with a better control on their safety. In this context, an innovative delivery system of protein antigens has been designed based on the chemical grafting of the antigen onto the shell of Nanostructured Lipid Carriers (NLC). By using the well-known ovalbumin (OVA) as model of protein antigen, we have compared the immunogenicity properties in mice of different formulations of NLC grafted with OVA, by studying the influence of two main parameters: the size (80 nm versus 120 nm) and the surface charge (anionic versus cationic). We have shown that all mice immunized with OVA delivered through NLC produced much higher antibody titers for all tested formulations as compared to that immunized with OVA or OVA formulated in Complete Freund Adjuvant (CFA, positive control). More interestingly, the 80 nm anionic lipid particles were the most efficient antigen carrier for eliciting higher humoral immune response, as well as cellular immune response characterized by a strong secretion of gamma interferon (IFN-γ). These results associated with the demonstrated non-immunogenicity of the NLC carrier by itself open new avenues for the design of smart sub-unit vaccines containing properly engineered lipid nanoparticles which could stimulate or orient the immune system in a specific way.

Real-time label-free detection of dividing cells by means of lensfree video-microscopy.

Quantification of cell proliferation and monitoring its kinetics are essential in fields of research such as developmental biology, oncology, etc. Although several proliferation assays exist, monitoring cell proliferation kinetics remains challenging. We present a novel cell proliferation assay based on real-time monitoring of cell culture inside a standard incubator using a lensfree video-microscope, combined with automated detection of single cell divisions over a population of several thousand cells. Since the method is based on direct visualization of dividing cells, it is label-free, continuous, and not sample destructive. Kinetics of cell proliferation can be monitored from a few hours to several days. We compare our method to a standard assay, the EdU proliferation assay, and as proof of principle, we demonstrate concentration-dependent and time-dependent effect of actinomycin D-a cell proliferation inhibitor.